| |
|
|
|
| Below details tech specs has to be add in IGBT Home UPS leaflet,load chart already given in design.This will be Both Side Printing |
|
| |
|
|
|
| TECHNICAL SPECIFICATIONS OF 600VA,800VA & 1400VA UPS |
| |
|
|
|
| DESCRIPTION |
600VA |
800VA |
1400VA |
| INVERTER MODE |
| Output Voltage At No Load |
220 VAC ± 7 VAC |
| Output Frequency |
50.0 Hz ± 1.0Hz |
| Output Wave Form |
Sine Wave |
| Nominal Battery Voltage |
12 VDC |
24 VDC |
| MAX. NO LOAD CURRENT @ FULLY CHARGED BATTERY |
1.7A |
1.4A |
| BATTERY LOW ALARM |
10.6 ± 2 VDC |
21.2 ± 0.2 VDC |
| BATTERY LOW PROTECTION |
10.4 ± 2 VDC |
20.8 ± 0.2 VDC |
| EFFICIENCY |
> 85% |
> 85% |
| NO LOAD CURRENT @ SWITCH OFF/MAINS OFF |
0A |
| THD ( TOTAL HORMONIC DISTORTION ) |
< = 2.5% @ resistive |
| UPS MODE |
| INPUT VOLTAGE RANGE |
180 to 270 VAC ± 10 VAC |
| CHANGEOVER TIME MAXIMUM |
< = 10ms |
| NORMAL MODE |
| INPUT VOLTAGE RANGE |
90 to 280 VAC ± 10 VAC |
| INPUT VOLTAGE RANGE FOR CHARGING |
90 to 280V ± 10 VAC |
| MAXIMUM CHANGE OVER TIME |
< = 10ms |
| CHARGING MODE |
| CHARGING CURRENT @ 220VAC (NC) |
7A +/- 1A |
9A +/- 1A |
| CHARGING CURRENT @ 220VAC (HC) |
10A +/- 1A |
14A +/- 1A |
| BOOST CHARGING VOLTAGE |
14.2 ± 0.2 VDC |
28.4 ± 0.2 VDC |
| FLOAT CHARGING VOLTAGE |
13.7 ± 0.2 VDC |
27.4 ± 0.2 VDC |
| PROTECTIONS |
| Protection |
WIRING FAULT, BATTERY VOLTAGE LOW (4 AUTO RETRIES), OVER LOAD (6 AUTO RETRIES) |
| BATTERY OVER CHARGE, OVER TEMPERATURE, SHORT CIRCUIT (ONE RETRY), BATTERY DEEP DISCHARGE PROTECTION |
| DISPLAYS |
| Display |
Mains on, Main Voltage, Output Voltage UPS ON / OFF |
| Short Circut, Overload, Battery Low, Load % |
| Mains ON / OFF, Battery Charging / Charged / Battery Low |
| |
| WEIGHT AND DIMENSIONS |
| With Packaging WXDXH in mm |
370x340x125 |
| Without Packaging WXDXH in mm |
305x240x80 |
| Net Weight |
4.2Kg |
4.7Kg |
| Gross Weight |
4.6Kg |
5.1Kg |
| GENERAL |
| Communication |
4 PIN Serial interface for calibration of various parameters |
| Operating Temprature range |
0 Deg to 45 Deg |
| Relative Humidity |
0-90% Non Condensing |
| Relative Humidity |
0-90% Non Condensing |
| |
|
|
|
| |
|
|
|
| Note : The charging currunt can be increased / decreased using the unieque and first-in-class On Site Charging Rate Control (OSCRS) features |
